RFQ Request a Quote

Vibration Isolators

GMZ-1-12

GMZ adaptive dampers · 12 kg nominal · 9–13 kg range

GMZ-1-12 belongs to the Vibration Isolators range. The figures below are the published values for this part number; confirm the drawing before release to production.

Dimensions and specification

Nominal load (kg)12
Load range (kg)9–13
Static deflection (mm)1
Natural frequency (Hz)15
Max displacement (mm)2
Transmissibility≤ 2
Unit mass (kg)≤ 0.25
Temp. (°C)-55 °C to +85 °C (-67 °F to +185 °F)

Dimensions in millimetres and weight in grams unless the label states otherwise. Temperatures are given in °C with the °F equivalent.

Where it is used

Electronics mounted in airborne, shipboard and vehicle-mounted equipment where platform vibration or shock would otherwise reach the chassis directly. Selection is per mounting point, not per enclosure.

How to select the vibration isolator

Isolators are selected per mounting point, not per enclosure. A four-point installation is four separate spring-mass systems, each carrying the share of the payload mass at its corner; selecting one part number from the total enclosure weight is the most common cause of a mount that is either too soft (excess deflection) or too stiff (no isolation).

The natural frequency target is the decisive number. Keep it below roughly half of the lowest disturbing frequency the platform produces, so the mount stays inside the isolation region above the crossover and does not amplify the input. The transmissibility figure in the table describes the amplification at resonance; it is a property of the damping architecture, not a substitute for the frequency check.

Architecture follows the spectrum. Adaptive metal and friction dampers suit platforms with a well-characterised, narrow-band input and high shock; high-damping silicone suits a compact part that has to attenuate a broadband spectrum within a limited envelope. Whichever is chosen, allow clearance for the maximum displacement, use shoulder bushings so the fastener cannot short the isolator, and leave slack in cable runs.

Compare with related part numbers

Part number Load range (kg) Natural frequency (Hz) Transmissibility
GMZ-1-12 12 15 ≤ 2
GMZ-1-5 5 15 ≤ 2
GMZ-1-20 20 12 ≤ 2
GMZ-1-1 1 18 ≤ 3
GMX-3 3 15 ≤ 2

Further reading

Related part numbers